
RAID 6 Data Recovery
RAID 6 keeps running with two failed disks, but with no protection left. A third failed disk stops the volume. R3 Data Recovery copies every disk sector by sector and reconstructs the array from the copies.
- Free DiagnosticsNo-obligation quote
- No recovery, no feeFor most jobs
- 7–10 Working DaysEmergency 12–72 hours
What makes a RAID 6 array fail
A RAID 6 array stops when it loses a third disk's worth of data. Two missing disks use up all of its protection, so anything more takes away blocks the array can't work out.
A third disk fails
With two disks already out, the array has no protection left. One more failed disk leaves some stripes with three missing blocks, and two parity values can only work out two.
A rebuild runs with two disks out
A rebuild reads every surviving disk to write the missing data onto replacements. With two disks out, there's no spare parity left. Any block another disk can't read during the rebuild can't be worked out, so that data is missing from the rebuilt array. RAID 6 is also very slow while two disks are missing.
A hot spare rebuilds without anyone checking the disks
A hot spare is a disk that waits in the array, ready to take over. When a disk fails, the array rebuilds onto the spare automatically, which is how it's designed to work. The risk is that the rebuild reads every remaining disk without anyone checking them first, and with two disks out, any block one of them can't read is lost from the rebuilt array.
The controller or NAS fails, or a pool shows Crashed
The disks can be fine while the array won't mount. The RAID controller manages striping order, parity calculations, and disk mapping. When the controller fails or its configuration becomes corrupted, the array can't assemble correctly. Swapping in a new controller without matching the original settings can destroy the array structure entirely. A Synology pool shows Crashed when there aren't enough disks to assemble it, and Synology says you can't repair a crashed pool yourself.
The array is re-created or re-initialised
If the array is re-created with any setting that differs from the original, such as chunk size, disk order or layout, the data is read from the wrong places. Creating the array again writes new metadata.
Several disks develop faults together
In one RAID 6 job, two disks went offline and the NAS stopped. Some disks had firmware problems and some had degraded surfaces.
What to do when a RAID 6 array fails
Stop, and don't start a rebuild. Anything that writes to the disks now can turn a recoverable array into lost data.
- Don't start a rebuild or add a disk yet. With two disks out there's no protection left, so a rebuild that hits one more fault can lose data.
- Don't re-create or re-initialise the array, even if you know its original settings. Both write to the disks. Note the settings down instead; they help us reconstruct the array.
- Keep the disks in their original order, and label each one with its slot.
- Don't run recovery software on the disks. It can overwrite the data you're trying to recover.
- Don't keep powering a failed disk on. If its heads are damaged, each attempt can damage the platters further.
- If the array stopped after a power cut and two disks are missing, don't force it to start. In that state the array can't recalculate parity, so data can be corrupted without any warning (the write hole).
Before you call, note down: the NAS or controller model, how many disks the array has, what status it shows, the order the disks failed in, whether you have a backup, and anything already tried (rebuilds, disk swaps, software). Don't run more tests to find out. Just tell us what you already know.
To speak to someone first, call the emergency line (open 24/7: 07511 051360).
RAID 6 arrays we recover
RAID 6 and the other levels
RAID 6 is one of the levels we reconstruct, with RAID 0, 1, 5, 10, 50 and 60, and Drobo BeyondRAID.
Synology NAS
Synology NAS in RAID 6.
Servers and NAS units
Arrays in servers and NAS units.
No recovery, no fee for most jobs
Every RAID 6 recovery starts with a free evaluation and a quote before work begins.
Emergency service
12 to 72 hours, depending on complexity.
Talk to a RAID 6 recovery engineer
If your RAID 6 array has failed, call before you change anything on the disks.
Why choose R3 for RAID 6 recovery
You see the file list before you pay. Files that came back damaged are marked.
The evaluation is free, and you get the quote before any recovery work starts.
Disks that need physical repair are handled in our ISO Class 3 cleanroom.
All data stays in the UK; drives never leave the country.
How RAID 6 recovery works
Every disk is copied first, and the array is reconstructed from the copies, never from your originals.
- 1
Free collection and intake
We arrange free UK weekday collection of every disk, or emergency collection within 60 minutes. Each disk is labelled and logged when it arrives.
- 2
Diagnostic evaluation
Engineers check each disk for physical damage, firmware faults and bad sectors. Disks that need physical repair go to the ISO Class 3 cleanroom. The evaluation is free, carries no obligation, and ends with a quote before any recovery work starts. Recovery work starts only after you approve the quote.
- 3
Copying each disk
Each disk is copied sector by sector. All recovery work is done on the copies.
- 4
Array reconstruction
We work out the array's original settings: stripe size, disk order, start offset, and how both parity blocks, P and Q, rotate across the disks. Then we reconstruct the array from the copies.
- 5
Data extraction and file list
We extract the file system and send you a file list. You see what we've recovered before you pay, and decide whether to accept it.
- 6
Return
Once you approve, you receive your data on a new external drive or by secure download.
Examples from the lab
A Synology DS1817+ in RAID 6, holding Veeam backups, stopped when two of its disks went offline. Some disks had firmware problems and some had degraded surfaces. Once those were fixed, each disk was copied sector by sector and the array was reconstructed from the copies. Recovery rules written for the Veeam files brought back almost all the data the customer needed. Synology RAID 6 case study
From R3's lab records
RAID 6 data recovery questions
Two disks have failed. Is my data safe?
Three disks have failed. Is the data lost?
The rebuild failed part-way. What now?
What's the difference between RAID 6 and RAID 5?
Does RAID 6 mean I don't need a backup?
How long does RAID 6 recovery take?
How much does RAID 6 recovery cost?
How do you keep my data secure?
Other RAID Recovery Services
- RAID 5 Data RecoveryRAID 5 has one parity block per stripe, so it fails at two disks where RAID 6 fails at three.
- RAID 10 Data RecoveryRAID 10 uses mirrored pairs instead of parity; which disks fail matters more than how many.
- Synology NAS Data RecoverySynology pools in RAID 6.
- Server Data RecoveryHardware RAID 6 arrays in servers.
Recover your RAID 6 array
Contact our RAID 6 recovery specialists for a free assessment and no-obligation quote. For urgent cases, the emergency line is open 24/7: 07511 051360.
Looking for general RAID recovery? View our RAID Data Recovery service